Thread-On Radiused Heavyfeet
Thread-On Radiused Heavyfeet, sold individually (2" tall x 2" diameter)

Thread-On Radiused Heavyfeet

0 Review(s) Write a Review
Your Price: $0.00
Thread-On Radiused Heavyfeet won't mar valuable furniture and wood floors. Four attached, full-height footers will increase the mass of each speaker or component by about 6 lbs. 2" and 1-1/2" tall versions available. Only for uncarpeted surfaces.
Part Number: TRHF
Free U.S. Shipping

Choose Options

*
*
*

• Thread-On Radiused Heavyfeet feature rounded bottoms that won't mar valuable furniture and wood floors. Only for uncarpeted surfaces.

• Thread-on brass footers are best suited whenever stability and safety of the component are primary—for instance, under turntables and floor-standing speakers. Where stability is not an issue, for best sound we prefer unthreaded Micropoints used unattached under metal or plastic bottoms and Triplepoints under wooden ones.

• Our 'Radiused' design prevents marring while allowing the footers to maintain direct, single point contact with the mounting surface. This obviates the need for protective discs under sharp points. These widely used flat brass or lead protective discs impair vibration transfer and eliminate single point contact, thus degrading footer effectiveness by at least 50%.

• Though our Radiused footers preserve single point contact, rounding doesn't sound quite as good as sharp point contact.  This sacrifices 5% to 10% of the footers sonic upgrade compared to the short, sharp point shape of standard Heavyfeet and Megafeet. 

• Thread-on footers are sold individually. They can screw into the existing threaded holes of any component or speaker but size-matching the threads is required. For speakers without threaded holes, select the wood screw attachment option.

• The default option for these footers is our full-height Thread-On Radiused Heavyfeet.  If the full-height 2” footers are too tall to fit, choose the lighter 1-1/2" height version from the "Footer Height' dropdown menu.  Only use shorter footers if necessary; there is a 15% reduction in performance compared to the heavier full-height version.

Thread sizes vary across manufacturers, so it is essential to confirm the size you need before ordering. To determine the thread size of your stock feet or their attaching screw, either call the manufacturer or take one of the feet to your hardware store. They will give you two size numbers, for instance, 1/4" by 20 (or 6mm by 1.0, for metric threads). The first number is the screw diameter, the second is the thread pitch in threads per inch or mm per turn, for metric. We stock the most common U.S. and metric sizes, ¼ x 20 and M6 x 1.0.

The default option for 'Thread Sizing & Attachment Hardware' is ¼" x 20 with a machine screw to thread into the matching threaded insert. The dropdown menu allows you a further choice of wood screws or M6 x 1.0 machine screws. 

• We can custom match any U.S. or metric thread size.  After you determine the diameter and pitch needed, please call 1-888-236-2753 to order or email [email protected] Custom threaded footers are non-refundable.

• The stock finish for our thread-on brass footers is handsomely hand-polished brass. We also offer Semi-Gloss Black and Metallic Silver powder coat finishes.  Powder coating is a made-to-order finish option that is non-refundable.

Prices include shipping. 30-day money back guarantee.

Related Items

Thread-On Heavyfeet
Free U.S. Shipping
(0)
Thread-On Heavyfeet For Carpet
Free U.S. Shipping
(0)
Thread-On Megafeet For Carpet
Free U.S. Shipping
(0)
Thread-On Radiused Megafeet
Free U.S. Shipping
(0)
Thread-On Megafeet
Free U.S. Shipping
(0)

Recently Viewed Items