A set of (3) Micropoint Heavyfeet, a 4" thick Bevelled Component Stand with clear satin finish, and Original Isoblock 1 suspension for up to 105 lbs.
A set of (3) Micropoint Heavyfeet, a 4" thick Bevelled Component Stand with clear satin finish, and Original Isoblock 1 suspension for up to 105 lbs.

21" x 19" VCS with 4" Component Stand

0 Review(s) Write a Review
Your Price: $510.00
Recommended as the best-sounding way to mount large electronic components and turntables, this Vibration Control System is composed of a set of Micropoint Heavyfeet, a 4" thick maple Component Stand and Original Isoblock 1 supports, as default options. The footer, finish and support options can be adjusted to suit your requirements and budget. Made from solid Ambrosia maple air-dried for 3-6 years by our Amish craftsmen, each Component Stand is pre-drilled so it can be mounted on either hard surfaces or carpet. Use Isoblock supports when mounting the platform directly on an uncarpeted floor, shelf or tabletop. If mounting it on a rug or carpet, use thread-on brass footers to penetrate through the pile and stably anchor the Component Stand to the subfloor.
Part Number: VCS-21x19x4
Free U.S. Shipping

Choose Options

*
*
*
Recommended as the best-sounding way to mount large electronic components and turntables, this Vibration Control System is composed of:

(1) set of three Micropoint Heavyfeet

(1) 18" X 15" x 4" Bevelled Component Stand
(1) set of four Original Isoblock 1 for up to 105 lb. load

The Component Footers, Maple Finish and  Support Options can be adjusted when ordering to suit your equipment requirements, decor and budget. 
 
(VCS with Isoblock suspension should only be used with electronics, not for speakers.  See our Speaker Stand section for Vibration Control Systems uniquely optimized for small and large speakers.)

• For best sound at a moderate price, Micropoint Heavyfeet are the default component footer option for our Vibration Control Systems. Choose other options using the Component Footer pull-down menu.

• If overhead clearance is limited, save 1/2" in height by choosing the Low Micropoint Heavyfeet option. If you can't bear dings in the Stand from sharp points, choose one of the Radiused Heavyfeet options with a 5% or so penalty in sound quality. If your component's bottom has corrugations, mesh or perforations where the footers need to be placed, choose Heavyfeet or Low Heavyfeet (flat-topped) option.

• For the ultimate in sound quality, choose the Micropoint Megafeet option or, if height is constrained, Low Micropoint Megafeet. The difference is very clearly audible, even under light components.

• Our stock Bevelled Component Stands are hand finished with Clear Satin that beautifully enhances the striking natural grain character of our air-dried Ambrosia maplethis is the default finish option. We also offer three made-to-order toned finishes: Natural CherryDeep Rosewood, and Satin Black.  Choose a made-to-order option from the Maple Finish drop-down menu.


VCS with clear satin finished Component Stands are stock items that normally ship in 5 business days and are offered with our 30-day money back guarantee.  VCS with made-to-order finishes are non-refundable, require a 50% deposit, and take +/- 8 weeks to ship.  Please be sure to review our Terms & Conditions.

• Isoblocks are the best suspension when installing the Component Stand on a hard surface (except for speakers). On rugs or carpeted floors, choose thick or thin carpet brass footers when ordering. 

• The undersides of Component Stands are pre-drilled with countersunk footer options and they can be used interchangeably with thread-on brass footers or Isoblocks as needed when you make room or system changes.

• The default Component Stand suspension option is a set of four Original Isoblock 1s, isolation footers that support loads up to 105 lbs. Choose other Isoblock options or brass footers for carpet from the Support Options drop-down menu.

• For general sizing, we recommend choosing a Component Stand that is about 2" wider and deeper than the component it will support; more margin improves sound further. 

• Because maple is an organic material, the exact weight of each Stand varies slightly. The distinctive character of Ambrosia maple's natural grain coloring and figuring is unique for each platform. Our Amish craftsmen hand-plane these Stands from the rough-cut, air-dried 4 1/2” maple to remove coarseness and imperfections from the sawmill. Typically this yields a finished 4" thickness but, because of variations in the rough-cut timber, the exact thickness can vary by 3/16".


• This Vibration Control System has been pre-discounted, so it is excluded from our other discounts offered. 

Related Items

18
$428.00
Free U.S. Shipping
(0)
15
$400.00
Free U.S. Shipping
(0)
20
$360.00
Free U.S. Shipping
(0)
20
$488.00
Free U.S. Shipping
(0)
21
$377.00
Free U.S. Shipping
(0)
24
$525.00
Free U.S. Shipping
(0)

Recently Viewed Items