15" x 12" Subwoofer Plinth

0 Review(s) Write a Review
Your Price: $0.00
2" and 4" thick, air-dried Ambrosia maple stand with attached footer options for optimized subwoofer performance on either hard floors or carpet. Choose clear satin finish that enhances the beautiful natural grain character of our old-growth maple or one of three made-to-order toned lacquer finishes.
Part Number: SUBPLINTH-15X12
Free U.S. Shipping

Choose Options


• For general sizing, we recommend using a Plinth that is about 2" wider and deeper than the subwoofer it will support; more margin improves sound further.  When necessary, we offer custom-sizing at additional cost.

• Our stock Subwoofer Plinths are hand finished with a clear satin lacquer that beautifully enhances the striking natural grain character of our air-dried maple. We also offer three made-to-order toned  finishes: Natural Cherry, Deep Rosewood, and Satin Black.

The default stand option is for a 2" thick Ambrosia maple with clear satin finish. Choose 4" thickness and made-to-order color options from the Maple Stands Thickness & Finish drop-down menu.

• 4" Subwoofer Plinths invariably sound better than 2" Plinths. The difference is clearly audible—and is particularly dramatic on concrete, tile, and engineered floors or subfloors.

• The distinctive character of Ambrosia maple's natural grain coloring and figuring is unique for each pair of stands. Our Amish craftsmen hand-plane matched pairs from the rough-cut, air-dried 2½" and 4½" maple to remove coarseness and imperfections from the sawmill. Typically this yields finished 2" and 4" thicknesses but, because of variations in the rough-cut timber, the exact thickness can vary by 3/16".

• The default option for footers attached to and supporting Subwoofer Plinths is Low Heavyfeet with short sharp points, the best-sounding 2" footer option on uncarpeted floors.  Be sure to use the 'Pre-Attached Stand Footers' dropdown menu options to choose footers best suited for your floor type.

• To avoid marring handsomely finished hardwood floors, use Radiused Heavyfeet. The rounded bottom incurs only a very slight compromise of sound quality relative to sharp points.

• When installing Subwoofer Plinths on luxury carpet and padding more than 1/2" deep, use Heavyfeet For Thick Carpet.

• For standard commercial-type carpet up to 1/2" deep, Heavyfeet For Thin Carpet will sound slightly better than the Thick Carpet version.

• When budget permits, upgrading Subwoofer Plinths with our far more massive Megafeet—3½ times heavier than Heavyfeet—is a worthwhile investment for listeners seeking the very best performance.

• We never recommend using Isoblocks as footers for subwoofers or as supports for subwoofer stands. Any somewhat soft footer allows the subwoofer to rock which inevitably muddies the bass.

• Now or later, we strongly recommend our brass footers to couple your subwoofer to their Plinths for improved sound. Ordering now will save you 15% on the footers. The discounted price is automatically displayed for each option.  Even the least expensive, Low Heavyfeet, will at least double the improvement you gain from a Subwoofer Plinth, compared to stock factory feet or spikes. You can choose from two footer categories.

• Unattached Footers For Subwoofers are best-sounding. Triplepoint Heavyfeet—or even better, Low Triplepoint Megafeet—will be your very best-sounding options but can be less stable under narrow or lightweight subs.

• We offer Thread-On Footers in sets of four,  as required by most subwoofers.  (If you need a different quantity, call 1-888-236-2753 or email [email protected].)  Thread-on footers offer maximum stability for very narrow subwoofers and whenever stability is primary.  They are also most convenient for subwoofers that are moved frequently.

• Investing in Megafeet as footers for subwoofers will make more difference than Megafeet as pre-attached footers supporting stands. Of course if budget permits, Megafeet for both will yield even better sound.

Subwoofer Plinths with clear satin finish are stock items that normally ship in 7 business days and are offered with our 30-day money back guarantee. Made-to-order Subwoofer Plinths and custom threaded footers are non-refundable, require a 50% deposit, and take +/- 8 weeks to ship. Please be sure to review our Terms & Conditions.

• Our pricing includes shipping costs within the continental United States. Additional charges apply for deliveries to Alaska, Hawaii, and outside of the contiguous 48 states.  Please email [email protected] to request an estimate, or call (410)685-4618.

Related Items

Free U.S. Shipping
Free U.S. Shipping
Free U.S. Shipping
Free U.S. Shipping

Recently Viewed Items