Mapleshade Vivilink 2 HDMI Cable with PLUS Upgrade (2m only)
You simply won’t see the great video image your expensive plasma or LCD/LED monitor can deliver without a good cable.
Conventional high-end HDMI cables have thick, energy-absorbing plastic insulation and excessively heavy-gauge,
slow responding conductors. This adds serious jitter to digital video data streams, just like it distorts audio data and signals.
Our Vivilink is dramatically different, using the same design ideas that make our audio cables so astonishingly clean and detailed:
thinner all-copper conductors, minimalist insulation with better dielectric materials than any famous high-end video cable.
Then we add in the same chemical and thermal treatments used for audio wires; they take image clarity and sound quality up another sizable notch.
The new Vivilink 2 takes HDMI performance another sizable step forward beyond the original, highly acclaimed Vivilink.
Our new design uses even thinner gauge, faster responding wire; more effective individual shields for each data conductor to replace the old single
overall shield; and an all-organic fiber mesh jacket of lower dielectric absorption instead of the previous plastic mesh. In head-to-head comparision
with its predecessor, the Vivilink 2 is an immediate improvement in image clarity on screen: more natural skin tones, more nuanced image contrast,
richly defined color depth, crisper edge resolution. With these results in hand, we confidently guarantee the Vivilink 2 delivers better picture
and audio quality than even the most expensive industry reference HDMIs including Audioquest Diamond, Wireworld, Crystal, PS Audio,
Kimber, Siltech, Furutech, Acoustic Zen, Synergistic, Tara Lab, and Acoustic Zen. 30-Day Money Back
The PLUS Option, Another Step Forward
All Vivilink 2 cables are available in a Plus version, using conductors with our proprietary stress-relieved metallurgy. Plus
improves picture quality, particularly shadow detail and nuanced differences between pastel colors, though the upgrade is less striking than
the major difference in clarity between Vivilinks and conventional high end HDMIs. If you are using the Vivilink for HDMI audio, the additional
cost for Plus is well-worth the modest additional cost. For both 2-channel and 7.1 audio, the Plus option yields two primary upgrades:
• Decreases brightness and grain in high frequencies, reducing edginess in the upper treble without sacrificing detail. The breathiness of
singers and flutes, the metallic ring of cymbals is better articulated and less abrasive. Plus significantly reducing listening fatigue
listening to music coming from a digital sourceous (i.e. Blu-Ray players, computers, and gaming consoles).
• Plus lowers the soundstage noise floor, resulting in a quieter, blacker background. This makes the most difference in dynamic passages,
as a scene transitions from silent suspense to thunderous drama. For music -- held guitar or piano chords sustain longer and resonate more clearly
as they fade into silence. Newly discovered details and nuances emerge from the negative space of the music on good recordings.
Performance and Design
The basic design concept for Vivilink is simple: we use viewing panel tests to uncover the crucial variables in designing good video cables—in exactly the same way that we use listening panel tests to design audio cables. The execution of this concept, of course, requires endlessly long hours of testing
and extraordinary attention to detail. For instance, the image deficiencies of even the best existing Blu-Ray discs led us to shoot our our own high definition video footage in order to have reference viewing scenes of sufficiently high quality. But all that work and all that meticulous care led to a clear conclusion: the same minimalist principles that make audio wires sound good lead to video wires that create superb imagery.
Our tests showed that the leading high-end HDMI cables use plastic insulation materials that have excessive dielectric absorption and that are much too thick. They also use conductors with too large a diameter: the most expensive ones use silver, notably inferior to copper in accurately
transmitting signal waveforms. These weaknesses lead to degraded edge resolution, reduced dynamic range (less shadow detail and less brilliant highlights), and muddier colors.
So instead we decided to come up with a first rate HDMI cable using the minimalist ideas that underly our audio cables: the thinnest possible conductors, the least possible insulation thickness, dielectric materials that prove best in viewing tests, and pure copper conductors. Then we added in the chemical and thermal treatments that work so well on our audio wires;
they led to a further visible improvement in the HDMI performance.
And, not coincidentally, the Vivilink will also yield significantly better audio quality than other HDMI cables. However, you will get even better audio performance by using our Mapleshade digital coaxial interconnects to carry the digital audio signal over a path separate from the HDMI cable, wherever possible. Audio always sounds better if it is not bundled inside an
HDMI cable together with video and power wires.
REVIEW of Original Vivilink by Audiophile Audition, July 2012
"Well, I have to retract my previous advice on this site that with HDMI cables there is one of the few cable areas where you are getting fleeced if you pay high prices for premium high-end HDMI cables instead of getting the $10 ones online, which I said are just fine. I haven’t A/B’ed the $10 ones with the premium cables from the cable biggies—perhaps there’s little difference. But the difference with Mapleshade’s new high-end HDMI cable was easily seen.
I’ve had some very bad luck with HDMI cables recently. Two of them went out simultaneously, and I was thinking it was my equipment rather than the cables. One was even what seemed to be the excellent short HDMI cable Oppo furnishes with their players. At the same time I have a video display of greater resolution and detail than my previous RPTV, and I’m following the advice of Pierre Sprey at Mapleshade to run the Oppo BPS-95 directly into my Panasonic plasma display rather than thru my Integra 80.3 multichannel preamp. (By the way, I hope none of you are using the audio channel of your HDMI cable. Sure, it was nice for the industry to provide both the video and audio on one simple cable (that often doesn’t work) instead of multiple cables, but I discovered long ago that the sonics are greatly improved running separate audio cables to and from the TV.)
I didn’t have the $1500 Audioquest Diamond HDMI to compare with, but I did have an expensive Monster Cable HDMI cable I’ve been using for some time. The instructions say to keep the HDMI cable away from anything plastic and to have it cross other cables only at 45 degrees of more, never bundled with other cables—especially power or speaker cables. One end of the Mapleshade HDMI cable is banded in red and that end goes into your video display. Mapleshade has a standard model at $125 as well as the Plus which they provided. The break-in time for the Plus version is double that of the standard: 100 to 200 hours, so I supposedly will be seeing even further slight improvements over time. I can see no visible interference from any other signals.
I had just completed most of the video tests on both the Spears & Munsil and HQV Silicon Optix Blu-ray Test Video Discs on my new Panasonic display. The first disc had some hi-def clips shot in the vicinity of Astoria, Oregon. I immediately saw that the struts on the long bridge across the Columbia River connecting Astoria with Washington State were fuzzy and indistinct with the Monster Cable HDMI. With the Mapleshade HDMI everything snapped into perfect focus, and at the same time the shadow detail improved considerably and the colors seemed to sing more. Although the Panasonic display has enhanced the black levels greatly over what was possible with my old Samsung RPTV, the Mapleshade HDMI cable offered up even blacker blacks. I had to do over again the Spears & Munsil evaluation patterns for black levels, contrast and brightness, which all affect one another and require lots of going back and forth.
Although Mapleshade’s Pierre Sprey is far from a videophile, he finds that the plastic insulation on all the other HDMI cables is too thick and the copper wires too fat. This distorts video data streams, so his design uses thinner conductors, less insulation, and better dialectic materials than the other high-end video cables. He then adds the same chemical and thermal treatment that they do on the Mapleshade audio cables, and that took it up another notch to the Plus version.
All I say is that when I’m now watching a superb Criterion restoration of a classic film, I’m viewing nearly as good an image as I could get in Portland’s best theatrical room, plus sound that probably beats it handily. " — John Sunier
||Ive never submitted a testimonial before
|...but I felt obliged to for the Vivilink 2 HDMI cable I just received the other day. I have a fairly nice display Sony XBR-65X950B and once I swapped out my old Audioquest HDMI cable Im embarrassed to mention which one the first thing my wife asked was, what settings I had the TV on since the picture was the best she has seen since we got the Sony. Enough said. The immediate improvement in detail and edge resolution along with color depth was very noticeable even to my skeptical wife. Whether through blu-ray or a bad cable feed, I am quite surprised and happy with the difference in picture quality. I always laughed off the claims made in your catalog as marketing speak or hyperbole but Im actually gonna order some more products from Mapleshade to replace some other overpriced cables I have in my high end audio system.|
|- Winston C, CA|